#
lined jacketed receiver, lined jacketed tank, lined jacketed vessel, pp lined pump, pvdf lined pumpProduct Range
    Bookmark and Share
zero hold up pressure filter, zero holdup pressure filter, zero hold up pressure filter in mumbai, halar coating, pvdf coating, etfe coating, pfa coating, halar coatings, pvdf coatings, etfe coatings, pfa coatings, halar coating in karnataka, pvdf coating in karnataka   Halar Zero Hold Up Filter
halar coating in gujarat, pvdf coating in gujarat, etfe coating in gujarat, pfa coating in gujarat, halar coating in tamilnadu, pvdf coating in tamilnadu, etfe coating in tamilnadu, pfa coating in tamilnadu, halar coating in karnataka, pvdf coating in karnataka   Lining/Coating of Fluoropolymers
etfe coating in karnataka, pfa coating in karnataka, halar coating in mumbai, pvdf coating in mumbai, etfe coating in mumbai, pfa coating in mumbai, us fda halar coating, antistatic conductive halar coating, hdpe coated centrifuge, pp coated centrifuge   US FDA Halar Coating
pvdf coated centrifuge, halar coated centrifuge, etfe coated centrifuge, pfa coated centrifuge, architectural coatings of pvdf, architectural coatings of feve, titanium equipment, hastelloy equipment, glass lined equipment, rotolined equipment   Antistatic Conductive Coating
#   Lined Columns / Scrubbers
#   Lined Jacketed, Vaccum Vessel
#   Lined Pumps
#   Lined Valves
#   Lined Nutsche Filter
#   Spares for GLR Vessels
fep lined valves, pfa lined valves, lined vacuum receiver, lining of fluropolymer, ptfe mist eliminator, ptfe packing support plate

Lining / Coating of Fluoropolymers

Lining of HDPE , PP, PVDF, ETFE & PFA available.
PROPERTY COMPARISON OF FLUOROPOLYMERS WITH OTHER THERMOPLASTIC

Properties/Polymers
HDPE
PP
PVDF
HALAR
ETFE
FEP
PTFE
PFA
Maxm. Use Temp0 C
60
90
120
150
150
200
230
260
Min. Use Temp0 C
-40
0
-50
-50
-50
-100
-100
-100
Hardness Shore D
63
70
77
75
73
55
55
64
Maxm. Thickness MM
5
5
5
5
5
5
0.1
5
Chemical Resistance
(Ranked)
Good
Good
(4)
Good
(3)
Very
Good
(2)
Very
Good
(1)
Excellent
(1)
Excellent
(1)
Excellent
(1)
Abrasion Resistance
(Ranked)
Excellent
Good
(2)
Excellent
(1)
Good
(2)
Good
(2)
Poor
(3)
Poor
(3)
Poor
(3)
Coating Cost
(Ranked)
Lowest
Lowest
(1)
Moderate
(2)
Moderate
(3)
Moderate
(3)
Expensive
(4)
Moderate
(2)
Expensive
(5)
Operating Range / Pressure : Fall Vacuum to 50 kg/cm2
Temperature : -100° C to 260° C
Advantages of Coating/Rotolining over glass lining, sheet lining & exotic metals : -
> Universal Chemical Resistance
> Suitable for Full Vacuum operation
> Heat transfer properties similar to glass lining.
> Easy to clean
> Food Compatible - US FDA & BSC approved.
> No Thermal Shock.
> Seamless, eliminating major sites for bio-film build up.
> No welds that can fall in time due to thermal cycling.
> Less depedent on the individual worker skill as in welding of the sheet.
> Higher product Purity as no adhesive residues.
> Economical due to lower labour content.

hdpe lined equipment, pp lined equipment, lined nutsche filter, lined column, lined scrubberHDPE Lining/Coating



It is a polymer made by the polymerisation of polytheylene monomer. It has excellent abrasion resistence alongwith good chemical resistence.

PP Lining/Coating



ptfe lined absoraer, ptfe lined stripper, lined diaphragm valve, high performange linings, hdpe lining
It is a Polymer made by the Polymerisation of the Propylene monomer. It is a tough material with excellent cut through and abrasion resistant properties. It is resistant to strong acids & bases but not to the same Temperature as fluoropolymers.

etfe coating in karnataka, pfa coating in karnataka, halar coating in mumbai, pvdf coating in mumbai, etfe coating in mumbai

PVDF Lining/Coating



It is a Polymer made by the Polymerisation of Vinylidine monomer. It is a tough material with excellent cut through and abrasion resistance properties. It is resistant to strong acids and bases but are readily dissolved by polar organics. This is the Lowest Cost fluoropolymer.


HALAR Coating/Lining



halar coating in gujarat, pvdf coating in gujarat, etfe coating in gujarat, pfa coating in gujarat, halar coating in tamilnadu








It is a Co-Polymer of ethylene (E) & Chlorotrifluoro ethylene (CTFE). It is a tough material with excellent cut through, abrasion resistance and impact properties. It is resistant to most chemicals except strong oxidizing agents and hot amines. It is FDA compliance.

etfe coating in karnataka, pfa coating in karnataka, halar coating in mumbai, pvdf coating in mumbai, etfe coating in mumbaiETFE Lining/Coating



It is a tough material with excellent cut through, abrasion resistance and impact properties. It is resistant to most chemicals except strong oxidizing agents and hot amines. It is FDA compliance. It is a Co-Polymer of ethylene (E) and tetrafluoroethylene (TFE). It is similar to HALAR. It is better than Halar.

FEP Coating/Lining

FEP Lining/Coating



It is a Co-Polymer of tetrafluoroethylene (TFE) & hexafluoroethylene (HEP) chemical resistance is similar to PTFE & PFA. It is used in the Semiconductor and pharmaceutical applications due to the excellent chemical resistance, high purity, and FDA compliance.

PFA Coating/Lining



PFA Lining/Coating


It is a Co-Polymer of tetrafluoro ethylene (TFE) with a perfluoroalkoxy monomer (PFA). PFA has better mechanical properties than PTFE or FEP. Chemical resistance is excellent similar to PTFE. It is used in the Semiconductor and pharmaceutical applications due to the excellent chemical resistance, high purity, and FDA compliance. This coating is most expensive because of high cost of material & high Temperature processing.


Lining/Coating job on API Chemical equipments

> Peeler Centrifuge
> Centrifuge - 14" to 60" MTD, LBT, BD.
> Filters - Pressure & Vacuum Nutsche, ANF, Cartridge, Speaker
> Dryers - Rotary Cone, Vacuum, Tray, Fluidised bed, ATFD
> Spares for glass lined reactors - Lid, Manhole Cover, Agitator, Thermowell, Flaush Buttom Valve, Shell etc.
> Vapour & Packed Columns, U tube, Shell & Tube Heat Exchangers.
> Reaction Vessels, Tanks, Receivers
> Pipings, fittings, Automatic/manual Valves
> Pumps, Impellers, Instruments.
> Blenders, Blowers.
Home  ::   About us   ::   Products   ::    Inquiry    ::    Site Map   ::    Contact us